Wednesday, November 14, 2007

Matte Black Mercedes-Benz CLK 63 AMG DTM Cabriolet


We’re going through a (matte) black and white phase this period here at Carscoop so this Mercedes-Benz CLK 63 AMG DTM Cabriolet shown over at our Dutch friends at Autoblog.nl, was something we couldn’t ignore. If it were our money, we’d certainly go for the Coupe as the Cabriolet looks kinda weird but we wouldn’t mind at all taking this 582 Hp “fraulein” for a spin. However, something tells us that we’d have to figure a way to do it without the “Dork 1” licence plates.






Click Here To Read More…

Cool Mercedes-Benz C 63 AMG Wallpapers


Our Italian buddies over at Autoblog.it have dug up a series of Mercedes-Benz C-63 AMG wallpapers that we fell in love at first sight. The 457 Hp German sports sedan has been photographed beside its racing spouse, the 2007 AMG Mercedes-Benz C-Class that takes part in the DTM races and the result is exquisite. All images are high resolution so take your pick and adorn your desktop with one of them. We did.








Click Here To Read More…

2008 Mercedes-Benz C 63 AMG Estate: "Officially Official"



The attack of the uber-wagons continues; spacious and at the same time outrageously powered, the C 63 AMG Estate isn’t a car for the faintly hearted. Packed with the same 6.3-litre V8 as the C 63 AMG Saloon that delivers 457 hp at 6,800 rpm and maximum torque of 600 Nm at 5,000 rpm, the Estate equals the even more ludicrously powered RS6 Avant’s 0 to 62 mph (100 km/h) time at 4,6 sec. May we remind you that that the 507 Hp M5 Saloon takes 4,7 sec while the Touring, 4,8 sec… Need we say more.









The new Mercedes-Benz C 63 AMG Estate: Unique high-performance estate

Affalterbach - Following in the Saloon’s footsteps, the C 63 AMG Estate is now also due to be launched. Under the bonnet with its distinctive power domes, the AMG 6.3-litre V8 engine delivers effortless acceleration. The high-revving naturally aspirated engine sets the benchmark in this segment with its maximum output of 336 kW/457 hp at 6800 rpm and maximum torque of 600 Nm at 5000 rpm. The unique high-performance estate accelerates from 0 to 100 km/h in 4.6 seconds; top speed is 250 km/h (electronically limited).


Power is transferred by the AMG SPEEDSHIFT PLUS 7G-TRONIC. Equipped with AMG steering wheel gearshift paddles and the three driving modes “C”, “S” and “M”, the seven-speed automatic transmission delivers a decidedly sporty or comfort-focused ride depending on the driver’s tastes. The automatic throttle-blipping function when downshifting is another innovation. In conjunction with the all-new front axle, the AMG speed-sensitive sports steering and the new 3-stage ESP®, the AMG sports suspension provides maximum driving pleasure and superb driving dynamics. The AMG high-performance braking system with large internally ventilated and perforated disc brakes all round provides optimum stopping power even during particularly dynamic driving. The standard specification includes 18-inch five-spoke AMG light-alloy wheels with 235/ 40 R 18 (front) and 255/35 R 18 (rear) wide-base tyres. 19-inch AMG multi-spoke light-alloy wheels shod with 235/35 R 19 (front) and 255/30 R 19 (rear) tyres are available as an option.


Design and appointments: more distinctive than ever

The design and appointments on the new C 63 AMG Estate are comfortably on a par with the sophisticated technology. The top-of-the-line AMG eight-cylinder model has been differentiated more clearly than ever from the series-production C-Class: typical hallmarks of the brand come in the shape of AMG bodystyling, the bonnet with power domes, the distinctive AMG radiator grille, the flared front wings, the AMG rear apron with its black diffusor insert and the AMG sports exhaust system with two sets of chromed twin tailpipes. The interior feel is dominated by the distinctive AMG sports seats with integral head restraints, the three-spoke AMG performance steering wheel with its flat underside and small 365-millimetre rim, and the tube-style AMG instrument cluster with its AMG-specific main menu. As an alternative to the standard-fit aluminium trim elements, AMG carbon trim can also be ordered as an option for the C 63 AMG Estate.


Largest load compartment in its class with up to 1500 litres

The load capacity of the C 63 AMG Estate ranges from 485 to 1500 litres (VDA measuring method) depending on the position of the 1/3:2/3-split rear seat backrests which can be folded forwards. No other car in the premium estate segment of this vehicle class can match this capacity. Standard equipment includes bag hooks and four anchoring lugs to secure the load, side stowage compartments with covers, a collapsible shopping crate as well as a combined luggage cover and retaining net. The new EASY-PACK tailgate opens and closes at the push of a button. The market launch of the C 63 AMG Estate is scheduled for the start of 2008; sales price incl. 19% VAT is EUR 69,853.



Click Here To Read More…

2008 Mercedes C 63 AMG Estate: Frankfurt Show Debut



Yesterday we wrote “In 2008 Mercedes will broaden the range of the new C-Class Estate with an AMG version”. Duh… Our reader Leo from Germany though had a different state of mind honoring us with a set of images featuring the 2008 Mercedes C 63 AMG Estate. Apparently, the C 63 AMG Estate will make its premier at this year’s Frankfurt show along with the rest of C-Class Estate versions.

Just like the C 63 AMG Sedan, the Estate is equipped with a normally aspirated 6.2-liter V8 engine delivering 457 Hp and 600 Nm of maximum torque. According to the info supplied by our friend Leo, the C 63 AMG Estate will sprint from 0 to 100 km/h (62 mph) in 4.6 sec (Sedan: 4.5 sec) and achieve an electronically governed top speed of 250 km/h (155mph). We’ll have more on the 2008 C 63 AMG Estate as soon as Mercedes… officially unveils the car.








Click Here To Read More…

Update: Mercedes C63 AMG High-Res Pics & Press Release


Following up on our morning post on the 2008 C 63 AMG here’s the official press release along with all 22 high-res images of Mercedes’ new sports sedan. In a nutshell, the C63 AMG is equipped with a normally aspirated 6.2-liter V8 engine that delivers 457Hp and 600 Nm of maximum torque. Accordingly, the C 63 AMG accelerates from 0 to 100 km/h (62mph) in 4.5 sec, while its top speed is electronically limited to 250 km/h (155mph) meaning that Mercedes’ proposition in the super sport sedan category is stronger and faster than its archrivals, Audi RS4 and BMW M3. Of course in no way does that mean its better but it’s a start. See the detailed press release and the high-res pics after the jump.














PRESS RELEASE: Affalterbach – In the German Touring Car Championships (DTM) the new AMG C-Class ensures exciting motor racing at the highest level, and now its roadgoing sister model is celebrating its debut: the new C 63 AMG. Its AMG 6.3-litre V8 engine develops a peak output of 336 kW/457 hp and a maximum torque of 600 newton metres – unrivalled figures in this segment. Accordingly the C 63 AMG accelerates from zero to 100 km/h in 4.5 seconds, while its top speed is electronically limited to 250 km/h. In conjunction with an all-new front axle, speed-sensitive AMG sports steering and the new, 3-stage ESP Ò, the AMG sports suspension ensures both outstanding driving enjoyment and exemplary handling dynamics. A combination of expressive design, a decidedly sporty interior and a high level of everyday practicality makes the C 63 AMG a unique high-performance car. The market launch will commence in early 2008.

With the new C 63 AMG, Mercedes-AMG GmbH is making a confident statement to mark the 40th birthday of the company. The new V8 flagship model is now the fifth generation of the AMG C-Class, whose family tree goes back to the C 36 AMG of 1993 – the very first vehicle developed as a cooperative venture between Daimler-Benz and AMG.

Merely the appearance of the C 63 AMG is impressive enough, with its wide, road-hugging stance. The new bonnet with its prominent power domes conceals the independently developed AMG 6.3-litre V8 engine, which develops a fulminating 336 kW/457 hp at 6800 rpm from a displacement of 6208 cubic centimetres. In this respect the C 63 AMG comes very close to the 470 or so horsepower delivered by the AMG C-Class racing touring car in the DTM series. This high output also benefits the power-to-weight ratio, which is a very favourable 3.6 kg/hp.

The torque developed by the AMG 6.3-litre V8 engine need fear no comparison either. The maximum of 600 newton metres at 5000 rpm is unrivalled in this class, and the torque curve is equally impressive: from 2000 to 6250 rpm the driver always has more than 500 newton metres on tap – ideal for powerful acceleration in any engine speed range.

V8 with thoroughbred racing technology and a designer exhaust note

Introduced in 2005, the V8 engine is installed in numerous AMG high-performance cars and excels with its thoroughbred motor sports technology.

Perfect cylinder charging is guaranteed by the vertical arrangement of the intake and exhaust ducts, as well as the magnesium variable intake manifold with two integral throttle flaps. Other high-tech features include variable camshaft adjustment, four-valve technology with bucket-type tappets, a particularly rigid aluminium crankcase of closed-deck design and the low-friction TWAS coating on the cylinder contact surfaces.

Among the particular strengths of the AMG V8 engine are outstanding responsiveness and enormous pulling power – by virtue of its large displacement, it develops over 30 percent more torque than comparable engines in this performance class. Electronically controlled fuel delivery is another reason for the outstanding agility and responsiveness to movements of the accelerator. With its sporty AMG sound, which was designed-in during a series of sophisticated trials, this eight-cylinder powerpack from Affalterbach offers the unique excitement of a fast-revving, naturally aspirated engine – an audible and immediate experience whether at low, medium or high engine speeds.

Key figures for the C 63 AMG at a glance:

Cylinder arrangement/ valves per cylinder-V8/ 4
Displacement -6208 cc
Bore/stroke -102.2/94.6 mm
Compression ratio-11.3 : 1
Output -336/457 kW/hp @ 6800 rpm
Max. torque -600 @ 5000 rpm
Acceleration 0-100 km/h -4.5 s
Top speed -250 km/h *Electronically governed
In the interests of optimal reliability, the C 63 AMG has a particularly efficient water cooling system and large engine and transmission oil coolers. Located behind the large apertures in the AMG front apron, these coolers ensure non-critical operating temperatures at all times – even under the extreme stress of the racetrack.

Like all AMG high-performance engines, the AMG 6.3-litre V8 is built in the AMG engine shop on the traditional "one man, one engine" principle. This means that one technician is responsible for hand-assembling a complete V8 engine to the highest quality standards – which is attested to by his signature on the AMG engine plate.


AMG SPEEDSHIFT PLUS 7G-TRONIC with blipping function

This high-performance eight-cylinder engine has the perfect partner in the form of the AMG SPEEDSHIFT PLUS 7G-TRONIC transmission. Equipped with AMG steering wheel shift paddles and three driving modes, the seven-speed automatic transmission allows a decidedly sporty or more comfort-oriented style of driving according to the driver’s preference. The different modes - "S" (Sport), " C" (Comfort) and "M" (Manual) differ in their shift characteristics and speed: gearshifts in "S" mode are around 30 percent faster than in "C", and no less than around 50 percent faster in "M" mode. Pressing a button is sufficient to activate the desired driving programme.

The new C 63 AMG is the very first AMG car to feature an automatic throttle-blipping function during downshifts. This not only enhances the driver’s emotional experience – the almost completely jolt-free downshifting process also reduces the load-change responses and has a particularly positive effect when braking before bends on the racetrack.

Redesigned front axle with 35-millimetre wider track

The C 63 AMG owes its outstanding handling dynamics to the AMG sports suspension and an all-new three-link front axle design. The stiff configuration of the springs and gas-pressure shock absorbers ensures optimal road contact and low body movements when negotiating serpentine bends at speed. The new front axle has a 35-millimetre wider track – visible by the more widely flared wheel arches – and therefore ensures lower dynamic wheel loads when cornering. A number of features make for substantially more stability and precision in all driving situations: the redesigned wheel location at the front axle is 100 percent more rigid, leading to a considerable improvement in steering precision. Another benefit makes itself felt when braking, as the new wheel location ensures an immediate response even under high dynamic stresses.

In combination with completely newly configured elasto-kinematics, the new wheel location provides greatly improved lateral dynamics and allows the driver of the C 63 AMG to benefit from significantly higher cornering speeds. A larger torsion bar stabiliser, new head bearings and dampers with rebound buffer springs further enhance this stability and precision. Steering feedback is also improved by the new kinematics. The speed-sensitive AMG sports steering has a ratio of 13.5:1, but feels more direct as a result of moving what is termed the instant centre of motion at the front axle. A more rigid Hardy disc in the steering column, as well as modified steering characteristics, make a further contribution to increased precision.

The multi-link independent rear suspension has also been thoroughly re-engineered, with a twelve-millimetre wider track and more camber leading to improved cornering performance. Reinforced drive shafts and drive joints increase fatigue strength and round off the improvements to the rear suspension of the C 63 AMG.

The completely newly developed AMG sports suspension combines outstanding handling dynamics with the long-distance comfort to be expected of a Mercedes – which also means that the C 63 AMG has the characteristic virtues of a genuine AMG.

18-inch AMG light-alloy wheels, 19-inch wheel/tyre combination on request

The C 63 AMG is appropriately fitted with new, 18-inch AMG light-alloy wheels in a five-spoke design. Painted in titanium grey, these high-sheen wheels in size 8.0 x 18 and 8.5 x 18 are shod with wide-base tyres in size 235/40 R 18 (front) and 255/35 R 18 (rear). Even more dynamic handling is made possible by the optionally available 19-inch AMG light-alloy wheels in a multi-spoke design. The front wheels are in size 8.0 x 19 with 235/35 tyres, with 9.0 x 19 wheels and 255/30 R 19 tyres at the rear.

Generously dimensioned AMG high-performance braking system

Internally ventilated and perforated disc brakes all-round reside behind the spokes of the AMG wheels. The front brakes have size 360 x 36-millimetre discs with six-piston fixed callipers, while deceleration at the rear is by 330 x 26-millimetre discs with four-piston fixed callipers. The AMG high-performance braking system is characterised by great sensitivity and high fade-resistance.

3-stage ESPÒ with Sport function as a new feature in the C 63 AMG

The Electronic Stability Program ESPÒ is specifically configured for the dynamic performance of the C 63 AMG, which is the first AMG model to feature the 3-stage ESPÒ with a Sport function. This system offers three different control settings, and is a logical further development of the AMG ESPÒ philosophy. The ESP key in the centre console enables the driver to choose between three modes - "ESP ON", "ESP SPORT" and "ESP OFF" – the currently active mode is shown in the central display of the AMG instrument cluster.

In "ESP ON" mode, the onset of handling instability leads to braking intervention at one or more of the wheels, accompanied by a reduction in engine torque. Briefly pressing the ESP key activates "ESP SPORT". In this mode the braking intervention to counter oversteer or understeer, as well as the accompanying reduction in engine torque, allows a higher dynamic threshold and, for instance, corresponding drift angles – which means that the driver of the C 63 AMG benefits from considerably more active driving pleasure. ESP Ò is restored to its normal function as soon as the brake pedal is operated.

Prolonged pressure on the ESP key activates "ESP OFF". There is no intervention to control the handling dynamics, and no reduction in engine torque – thus increasing driving enjoyment even further. "ESP OFF" should only be used by experienced drivers on dedicated racetracks. In this mode too, operating the brake pedal restores all the normal functions of ESPÒ.

The system’s traction logic is active in all three ESP Ò modes. If one of the drive wheels threatens to spin, specific brake pressure is applied to create the effect of a mechanical differential lock. This means that the engine power is optimally transferred to the road.

More distinctive exterior design than ever before

It is not only in technological but also in visual terms that the new C 63 AMG is more distinctively different from the standard C-Class than ever before. The front end is dominated by the new bonnet with its two pronounced power domes, as well as the trademark AMG radiator grille with a central star and two louvres with chrome inserts. The honeycomb pattern of the grille is also reflected in the large air dams of the new, athletically contoured front apron which forms part of the AMG-specific bodystyling. The fog lamps with chrome surrounds are spaced well apart, acting together with the flared front wheel arches to accentuate the width of the car – with the striking transition from the front apron to the wings leaving a particularly strong impression. The side air vents in the front apron serve to expel the hot air from the oil coolers. If the C 63 AMG is specified with the optional bi-xenon headlamps or the Intelligent Light System, the headlamps are also dark-tinted.

Eye-catching features when viewed from the side include the 18-inch AMG light-alloy wheels, the harmoniously integrated "6.3 AMG" lettering on the front wing and the AMG side skirts. At the rear the standard LED rear lights, the AMG rear apron with its black diffuser insert and three pronounced diffuser fins, as well as the AMG sports exhaust system with two chrome twin tailpipes, provide further visual highlights that are hallmarks of the brand. The AMG spoiler lip on the boot lid reduces lift and ensures greater handling stability at high speeds.

AMG interior with new sports seats and performance steering wheel

This decidedly sporty theme is continued in the interior of the C 63 AMG, which now has special AMG sports seats with integral head restraints for the first time. The seats not only feature a new design with cross-piping and AMG lettering, but also an adaptive backrest with adjustments for the side bolsters and lumbar support. The standard upholstery in ARTICO man-made leather/AMG fabric is available in a choice of black or reef grey – or as an option the interior can be further enhanced with particularly high-grade leather in black, reef grey or black/sahara beige. Perfect handling control is assured with the new AMG performance steering wheel in a three-spoke design, which has a rim diameter of 365 millimetres and a flattened lower section. The upper section is covered in perforated leather, and two silver AMG shift paddles enable the gears to be shifted manually.

AMG main menu with a wide variety of displays

The trademark AMG instrument cluster in a tubular design features newly styled dials, AMG-specific lettering and a new night-time design. Eye-catching details include the 320 km/h speedometer scale, AMG lettering, red needles and the "6.3 V8" logo in the rev counter. The AMG main menu in the central display allows numerous settings, with "Warm Up", "Set Up" and "RACE" modes activated via buttons on the AMG performance steering wheel. "Warm Up" displays the engine oil and coolant temperature, "Set Up" the current ESP Ò mode and the transmission mode "S", "C" or "M". "RACE" mode makes the RACETIMER available, with which the driver is able to measure lap times on a racetrack.

Development and design of the C 63 AMG

Creating a new car is a complex undertaking, and this certainly applies to the new Mercedes-Benz C 63 AMG whose conceptual phase commenced in 2004. This began with the fundamental feasibility study known as packaging. The new C 63 AMG was first constructed as a digital model, the engine, cooling system, fuel system, drive train and axles being "married" with the bodyshell to examine buildability. In spring 2005 the first 1:4-scale design models were produced on the basis of drawings and computer images, and in addition the first testing & development vehicles were already built on the basis of the preceding C 55 AMG. This made it possible to test major assemblies such as the drive train, brakes and axles. The latest onboard measuring technology provided valuable data such as engine oil, coolant and brake disc temperatures – but other aspects of interest were lap times e.g. on the north loop of the Nürburgring, as well as measurable, precisely defined handling manoeuvres to provide comparisons between different axle configurations. These tests were accompanied by extensive aerodynamic tests on the bodyshell of the C 63 AMG, and it was only then that the final design was approved.


Following approval of the concept in the autumn of 2005, the first fully-fledged prototypes of the C 63 AMG were built. At the same time the high-performance saloon was also produced as a digital prototype. Computer simulations made it possible for the "real" development prototypes to exhibit a very high level of maturity during the first rollout. These simulations included the most important vehicle functions, such as handling dynamics, the engine and drive train, bodyshell durability, suspension performance, passive safety, the engine’s thermal characteristics and performance/fuel consumption.


From Affalterbach to every climatic zone on earth

The standardised and highly sophisticated AMG development and test programme for the C 63 AMG began in summer 2005. Over the next couple of years around 20 vehicles were dispatched all over the world from Mercedes-AMG GmbH in Affalterbach, to be subjected to strenuous tests in every climatic zone.

Test, analyse and optimise – that is the creed of the specialists at AMG to achieve the objectives laid down in the book of specifications. Another decisive aspect was an ongoing dialogue between Design and Development, so that any necessary technical modifications were also implemented in design terms.

The major test stages at a glance.



Development testing of the engine, transmission and drive train
car rental
Altitude tests in Denver, Colorado (USA), Lesotho (South Africa), Mont Ventoux (France) and Granada (Spain)
High temperature tests in Death Valley, California (USA), Upington (South Africa), Idiada proving ground (Spain) and Phoenix, Arizona (USA)
Driving trials in Los Angeles, California (USA)
Cold temperature tests in Arctic Falls (Sweden)
Development testing of the cooling and fuel systems

Various driving trials on the high-speed tracks in Nardo (Italy) and Papenburg
Trials in Upington (South Africa) and Death Valley, California (USA)
Tests in the DaimlerChrysler wind tunnel
Development testing of the braking and control systems
car tuning
Brake testing on the high-speed track in Nardo (Italy) and the Grossglockner Alpine pass (Austria)
Testing of dynamic control systems on the Idiada proving ground (Spain), in Arjeplog (Sweden) and on the Boxberg proving ground
In addition various endurance trials are run, with the aim of simulating the vehicle’s entire lifecycle under the most severe conditions:
North loop of the Nürburgring: The car’s drive train, suspension, wheel location system, dynamic control systems, tyres and brakes are tested on the world’s most demanding racetrack.

Long-term testing on different roads: All the components and systems are tested together in everyday operation. Loaded up to their permitted gross vehicle weight, the test cars are put through a precisely defined test programme on country roads, motorways and in city traffic.
Endurance testing on the DaimlerChrysler proving ground in Papenburg: Extreme acceleration and braking manoeuvres with a high proportion of full load operation, making extreme demands on the cooling and fuel delivery systems.
· Endurance testing in the Swabian Alb region: The vehicles are loaded up to their permitted gross vehicle weight and driven on country roads with numerous uphill and downhill gradients, placing extreme loads on the transmission and drive train.
“Heide” endurance testing: (named after the poor post-war roads across the “Lüneburger Heide”): 2000 kilometres of extreme trials on the test track or on state-of-the-art test rigs. In this case the focus of the developers is on the durability of the drive train components, the entire bodyshell and the integral subframe on which the front axle, steering and engine are mounted. The test cars are loaded up to their permitted gross vehicle weight.

These tests are supplemented with extensive crash simulations and real crash tests, to provide the necessary evidence for country-specific certifications without which no registration would be possible. The end result is final vehicle approval – the green light for the launch of the C 63 AMG.

Mercedes-Benz C 63 AMG

Engine

No. of cylinders/arrangement- -8/V, 4 valves per cylinder
Displacement- -6208 cc
Bore x stroke- -102.2 x 94.6 mm
Rated output - -336/457 kW/hp at 6800 rpm
Rated torque- -600 Nm at 5000 rpm
Compression ratio - -11.3 : 1
Mixture formation- -Microprocessor controlled petrol injection, HFM

Power transfer.


Drive- -Standard drive
Transmission- -AMG SPEEDSHIFT PLUS 7G-TRONIC 7-speed automatic
Ratios-Final drive 1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear Reverse-2.85
4.38
2.86
1.92
1.37
1.00
0.82
0.73
-3.42/-2.23
Running gear

-Front axle -Three-link suspension, anti-dive, coil springs, gas-pressure shock absorbers, stabiliser
-Rear axle -Multi-link independent suspension, anti-squat and anti-lift, coil springs, gas-pressure shock absorbers, stabiliser
-Braking system-Disc brakes all round, internally ventilated and blind-drilled, foot-operated parking brake at rear, ABS, Brake Assist, 3-stage ESP®
-Steering-Speed-sensitive rack-and-pinion steering, steering damper
Wheels-Front: 8.0 J x 18; rear: 9.0 J x 18
Tyres-Front: 235/40 ZR 18; rear: 255/35 ZR 18
Dimensions and weights.


Wheelbase- -2765 mm
Track width front/rear- -1568/1525 mm
Overall length- -4.725 mm
Overall width- -1.795 mm
Overall height- -1.438 mm
Turning circle- -10.8 m
Boot capacity*- -475 l
Kerb weight acc. to EC- -1.730 kg
Payload- -505 kg
Perm. gross vehicle weight- -2.200 kg
Tank capacity/reserve- -66/8 l

Click Here To Read More…

Mercedes C63 AMG Official: 457Hp & 0-100km/h In 4,5 sec


Someone let the dogs out quite earlier than we expected, but hey, that’s totally ok with us. While we’re waiting for the white collar folks down at Stuttgart to finish off eating their mini-wursts so they can upload the press release let’s see what we have beginning with the heart of any sports car. Under that bulgy hood the 2008 C 63 AMG is hiding the same normally aspirated 6.2-litre V8 engine that’s fitted in the CLK 63 AMG, E63 AMG, CLS 63AMG etc. As anticipated, Mercedes detuned the engine in comparison to other AMG models, lowering output to 457Hp. Still though that’s 37Hp more than the that its two German arch rivals, the 2008 BMW M3 and the Audi RS4, both of which are equipped with 420Hp strong V8’s.



In terms of maximum torque, the 6.2-litre V8 reaches a whopping 600Nm at 6.000 rpm, but there’s 500Nm of torque available from 2.000 to 6.250 rpm. The C 63 AMG accelerates from 0 to 100km/h (62mph) in 4,5 sec (RS4: 4,8 sec, M3: 4,8 sec) while its top speed is electronically limited to 250 km/h (155 mph).


Design-wise and apart from the usual visual treatment with the side skirts, sport bumpers, 18-inch rims etc, Mercedes has equipped the C 63 AMG with a new hood featuring two bulges reminiscent of the ones found on the first-generation SLK roadster. In all, the C 63 AMG is probably the most brutal looking car among the three German sports sedans, but we would have definitely preferred another grille as it reminds us of supped-up Eastern European Mercedes taxis.

Inside, Merc designers were a bit more constrained as the only significant changes seem to concern the “cut” sports steering wheel and the new gauges in the dashboard. We’ll have more on the 2008 C 63 AMG as soon as we get our hands on the high-res pictures and the official press release.











Click Here To Read More…

Alfa Romeo Preparing 147 Ducati Corse Special Edition With 170Hp



Italian car site “Infomotori” is reporting that Alfa Romeo will introduce a special edition version of the 147 compact hatch developed in collaboration with Ducati Corse. The 147 Ducati Corse will be equipped with an enhanced version of the 1.9 turbodiesel engine, developing 170 Hp (+20 Hp). The extra 20Hp will be available via a power-boost switch in the centre console. Apart fom the more aggressive bodykit, the sporty trim and the 18-inch alloy wheels, the Ducati Corse version will also feature Alfa Romeo’s "Q2" limited slip differential.

Click Here To Read More…

Alfa Romeo Contest: Name The "Junior" And Win A Spider!


While everyone was fooled into believing that Alfa Romeo’s MINI adversary would be named “Junior” when it goes on sale next year, the Italian sports carmaker surprised us by announcing an online contest were the public will help choose the name of the hot hatch! The competition is open up for residents in Italy, France, Spain, Germany, England and Japan. Alfa Romeo will also hand out several prizes including a brand new Spider for the “godfather” of the so-called Junior.


If you happen to live in any of the countries liable for the competition, check out the links after the jump and give it a shot. Just don’t go for any weird names like Sabretooth or Poutaneska and please check out an Italian dictionary before you submit a name; Cazzo might sound cool in English but the Italians won’t find it amusing, trust us…


www.alfanaming.it (for residents in Italy)

www.alfanaming.fr (for residents in France)

www.alfanaming.es (for residents in Spain)

www.alfanaming.de (for residents in Germany)

www.alfanaming.co.uk (for residents in England)

www.alfanaming.
jp (for residents in Japan)




Click Here To Read More…

Fiat Group Reveals Fiat, Alfa & Lancia Design Studies


Fiat Group revealed details and pictures of the winning studies in the “Design the Italian Way” competition which was launched on November 30, 2006. In all, 200 students of 12 different nationalities took part in the competition. The design students were divided into three groups (Alfa Romeo, Lancia & Fiat) and in total they presented 100 projects of which 24 made it to the final stage. On September 20, six projects were singled out by the jury comprising experts from the design field, fashion world, architects and specialized journalists.


For the Fiat brand students were briefed to create a concept for the future Panda and a family of models around the Grande Punto. In regards of Lancia, participants were asked to develop two different concepts belonging to the same product family: a compact mainly for town use and a versatile, small-size MPV. Finally, those who chosen for the Alfa group, were told to produce three concepts: a 'large', versatile sports model; a flagship model and a 'small', zippy car, fun to drive and with an affordable price.




Press Release: Awards made in the Fiat Group Style Centre's “Design the Italian Way” competition
The closing evening of the “Design the Italian Way” competition took place on September 20, 2007 in the new Fiat Group Automobiles' Style Centre headquarters (Officina 83). Participants in this competition launched on November 30, 2006 came from eight of the world's leading design schools: Turin's European Institute of Design, the Design Faculty of Milan Polytechnic, Detroit College for Creative Studies, Coventry University of Art and Design, Tokyo Communications Arts, Moscow's Stroganov State University, Ahmedebad National Institute of Design (India) and the Umea University Institute of Design (Sweden).

The idea for this award was a joint effort that involved not only Style Centre designers but also the Fiat, Lancia and Alfa Romeo brands and their respective Product, Engineering & Design and Human Resources management teams. The basic features to be incorporated in projects developed for each of the three brands were defined by the CEOs of Fiat, Lancia and Alfa Romeo, namely, Luca De Meo, Olivier François and Antonio Baravalle.

The 200 students, of 12 different nationalities, who participated in the “Design the Italian Way” competition were divided into three groups – one for each brand – and in total they presented 100 projects. A winner for each brand was then chosen from designs submitted by each of the participating schools. In the majority of cases projects were the work of a 2/3-student team who were represented by one member at the final evening. All of them will participate in a Fiat Group Automobiles programme providing hands-on experience, thanks to a study grant covering five months in the Fiat, Lancia and Alfa Romeo Style Centres. A training period that will specifically focus on developing Product Communication and Style Development skills.

During the closing evening the jury comprising experts from the design field, fashion world, architects and specialised journalists singled out six works from the 24 project finalists that were given special mentions. The awards covered the Best Italian Design for the Fiat, Lancia and Alfa Romeo brands; Best Innovative Material Use; Best Future Vision; Best Overall Communication.

For the Fiat brand the briefing students received was to develop a concept for the future Panda and to create a family of models around the Grande Punto. They were also told to bear in mind items and products associated with these two cars that can create a new, strong and distinctive family feeling based on smiles, a friendly feeling, simplicity and dynamism, which are the hallmarks of this brand.

As regards Lancia, students were asked to reinterpret the brand's concepts of refinement, glamour and technology in an innovative key, developing two different concepts belonging to the same product family: a compact mainly for town use and a versatile, small-size MPV. In this case, there was to be a special focus on interiors to ensure maximum possible personalisation in line with current fashion trends.

There were three concepts for Alfa Romeo: a 'large', versatile sports model; a flagship incorporating a new stylistic approach while still meeting the expectations of traditional customers; a 'small', zippy car, fun to drive and with an affordable price. As for interiors, the request was hi-tech devices, shapes and content. Sporty style and emotions are what differentiate the style of this brand.

On the occasion of the final evening of “Design then Italian Way”, held in the new premises of the Fiat Group Automobiles' Style Centre, three separate areas were organised – one for each brand – with an exhibition of works by the 24 finalists. Jury members were able to talk with the young designers, review their projects and decide which deserved special mention. And so after the gala dinner there was an official prize-giving for the 24 winning entries followed by awards for the projects selected for a special mention.

Best Italian Design for the Fiat brand: Fiat Panda – Danilo Tosetti, Luca Seren Gay, Enrico Vercelli – Istituto Europeo di Design, Torino (Italy)

Best Italian Design for the Lancia brand: Lancia Aemila – Naoya Tsukamoto, Tatsuya Yamamoto, Chen Yi Kai – Tokyo Communication Arts (Japan)

Best Italian Design for the Alfa Romeo brand, ex aequo: Alfa Romeo – Mahan Ghose – National Institute of Design (India) and Alfa Romeo Area – Carmelo Giannone – Istituto Europeo di Design (Italy).

Best Innovative Material Use: Panda Splash – Federico Weber, Danilo Mangini – Politecnico di Milano (Italy)

Best Future Vision: Fiat Panda – Danilo Tosetti, Luca Seren Gay, Enrico Vercelli – Istituto Europeo di Design, Torino (Italy)

Best Overall Communication: Fiat Panda – Danilo Tosetti, Luca Seren Gay, Enrico Vercelli – Istituto Europeo di Design (Italy)


Young designers from all over the world

Here are the impressions of some of the designers at the Fiat Group Automobiles' Style Centre who were personally involved in organising this venture. Impressions as to how the various schools participated in the “Design the Italian Way” competition and came up with winning projects and how Italian style has been interpreted in the various countries.

College for Creative Studies of Detroit

Detroit, one of the world's car capitals. Accompanied by students from the College for Creative Studies we visited the GM 'building' where American cars dating from the Fifties to the present day are on show. This gave us a chance to reflect on how US style has changed. Rear fins, extremely long convertibles, exaggerated streamlining, outlandish stylistic provocations and over-generous sizes are nothing more than a memory.

Today, in fact, on the wave of greater penetration of Japanese models in the domestic market, the styling of American cars is much more subdued and sizes are much closer to what we are used to in Europe.

During a short tour of the College for Creative Studies we discovered that youngsters study a lot of technology and computer use but, above all, they learn the creative and 'practical' aspects of working as designers, starting from building complete scale models in the College's fully equipped internal workshop.

The Detroit students' approach to the competition was impeccable, based on an in-depth study of the brand's history as a source of inspiration for their task. The features of our brand had to be maintained and so we explained to them what designing an Alfa Romeo really means.

The models we reviewed displayed what for us was a familiar language, like the wheel to body Iine that ensures the car has 'aesthetic stability', large wheelarches, the so-called 'three-lobe' design (comprising the shield and lower wave that, together with the headlights, give cars their face), and many other features...

The results were way above average and taste and attention to proportions were in the best Alfa Romeo design tradition: windscreen moved back to obtain a large bonnet, high aerodynamic tail and other details guaranteeing a similar aesthetic effect – as we designers at the Alfa Romeo Style Centre say – a feline ready to spring.

It was difficult to choose only one winner because all the projects were very well executed. An admirable approach to the task and care taken in realising the projects are the strengths of these young future designers, in a world where there is increasing pressure to work faster, but where working diligently is even more important.

Alessandro D’Ambrosio

Ahmedebad National Institute of Design (India)

The welcome we received at the Ahmedebad National Institute of Design will certainly be impossible to forget: you could feel the passion and firm commitment with which the students tackled their work. Their in-depth analysis had fully captured the identity of our brands, with some unquestionably interesting results. Influenced by a culture taking its inspiration from 'decorativism, they produced some particularly elaborate objects, preferring formal as opposed to conceptual research. What struck me was how the students associated the Lancia brand with a gondola, an Italian icon representing superb craftsmanship, whereas Alfa Romeo was at times the aggressiveness of a cobra or the power of a tiger. Fiat, instead, was considered a brand where the most important features were colours and a fresh approach to shape and line.

This institute runs courses in industrial design, fashion, architecture, cartoon animation: students use top-level technological tools with a laboratory equipped with latest-generation fast prototyping machines.

The general level of the school is good, very close to that of its European counterparts, and students are highly motivated.

Juan Manuel Diaz

Tokyo Communication Arts, Japan

We found great variety in design and formal terms, in the projects developed by students at the Tokyo Communication Arts school. The result of a continuous interaction between the youngsters' personalities and Italian design has led to very conceptual proposals focused on style. All projects were realised bearing in mind brand values and the fact that Lancia is not present in the Japanese market meant students were rather like 'pioneers' exploring uncharted territory.

Very fluid, sinuous shapes are the hallmark of the projects, with graphics and lines that give the designs a very expressive harmony, sometimes intentionally provocative, but always bearing in mind technical and functional credibility.

The work of Tokyo Communication Arts' students shows they have a considerable knowledge of the car design world, executing ideas and volumetric approaches of their projects in a very professional manner, while a great deal of attention has been given to surfaces. This has resulted in top quality models created by students divided into small groups who worked with passion and pride and adopted a professional, respectful attitude.

Andreas Wuppinger

Turin European Institute of Design

and Design Faculty of Milan Polytechnic

For these two schools, interpreting Italian design is much less a run-of-the-mill task than it would seem. In fact, it isn't true that merely being Italian makes this task so much easier. But also, identifying the essence of Italian style from within is even more complex: so just like their foreign counterparts, students first had to undertake historical research and comparison of the various brands.

From their research it emerged that the hallmarks of Italian design are, on the one hand, good taste, creativity, affability, joy of life, but also the 'physicality' that is an underlying trait of the national character in terms of passion and conviviality. In fact, we are a nation of people who look for and engage in contact, discussion and gesturing, traits not found in other countries. And design is evidence of this desire to communicate, contact and interact.

Each of the two schools used their own individual approach and methods while performing this task. The Polytechnic conducted broad research based on an amazingly in-depth survey and capacity for analysis. They then came up with a stylistic idea based on their well-organised conceptual structure, expressing this in an attractive design perfectly in line with the theoretical content.

Instead the youngsters at ED acted essentially on instinct, researching the historical and current industrial scene to come up with what best fitted their strong underlying stylistic intuition. They then worked towards formalising the initial idea, refining and sometimes completely changing it, but without ever losing the freshness of their original idea.

So, diametrically opposite methods, although both yielding excellent results.

Anna Maria Palmigiano

CoventryUniversityof Art and Design

and Umea University Institute of Design

Returning to a design university after having made design my profession was extremely gratifying. The students' strong desire to learn and express their ideas grows every year and the tools available to them today are a real help in allowing them to fully display their creative streak.

Analysing the work of the British students I was amazed by the outstanding quality of their projects and I found it extremely interesting to follow these youngsters who have managed to maintain a high level of creativity and boundless enthusiasm, in strong contrast with their country's well-known, dismal climate.

I was also curious to find out the British point of view as regards an Italian car: I was very happy to see that they demonstrated great professionalism in terms of respecting the brand's values while including their own personal touches. Exactly what we were looking for.

In summary, Coventry has come up with fantastic projects and results that have opened up a new and interesting perspective.

The visit to Umea University was an extremely interesting experience too. At first – it was mid-winter – the beauty of the University's location and interesting architecture give the impression it is just the right place to study design. All the students achieved extraordinary results. I was expecting Swedish design to be cold and essential; instead Italian design has been interpreted with Swedish passion and taste, but without conforming to national canons. The students have managed to present their ideas for each of the Italian brands in a unique way and the beauty of all this is the innovation and visible excitement found in each of their projects.

Frank Stephenson

StroganovState University, Moscow

Briefing young Russian designers was a very special experience. Moscow University is a huge complex with different laboratories dedicated to artistic disciplines, architecture and design. In specialist departments you can find a workstation where, for instance, a student is designing an ultra-modern high-speed train, sketching a side view freehand, still using geometric constructions we are no longer used to seeing today.


We managed to stimulate a great deal of interest and debate, despite the evident difficulties of long intervals caused by having to translate from English into Russian. Well, often they made me feel like the leader of a team of associates, they even resembled my habitual ones!

We dedicated quite a bit of time to recognizable brand values on which proposals were based and all students also had the right attitude in terms of tackling the communication and marketing strategy aspects for the products.


From the design standpoint, the Moscow students' ability to imagine our brands' vehicles projected into the future came about by breaking down past forms to come up with new and highly expressive ones.


From these encounters what remains is the memory of an experience showing that talent can be found in the most unexpected places. And also how the diversity found in a city like Moscow is a stimulus that nourishes the imagination and the 'human' design school, which is always the result of getting to know each other and discussion.



Click Here To Read More…

Frankfurt Preview: Alfa Romeo Customization Programme



Unless Alfa Romeo decides to surprise us in Frankfurt, we’ll have to do with the 147 C’N’C that we previewed earlier today and the display of customized versions under the “Unique-Alfa” program which enables customers to make their Alfa’s more refined and exclusive. Buyers can select between three different customization programs: the Vintage which adds a classic touch to your Alfa, the “fashionista” Collezione and the “sporty” TI. Guess we’re going to spend all of our time at Alfa’s stand gazing at the 8C Competizione – damn, think an every day John Doe like ourselves will ever get the chance of owing one of these.





The new ‘Unique Alfa’ Customisation Programme

‘Exclusiveness and personality’ have always been distinctive features of the Alfa Romeo brand, a fact borne out by the broad choice of bodies, engines, exterior outfits, interior furnishings and options, enabling customers to order the car that meets their needs and their desire to be different.

To extend this broad choice even further, and in response to the growing number of requests from the market, Alfa Romeo has now developed the ‘Unique Alfa’ Customisation Programme, a new departure for the brand that will enable customers to make their cars even more refined and exclusive.

The Alfa Romeo Customisation programme has been available on the entire range for a couple of months, and was born out of the experience of the Alfa 8C Competizione, the model that the brand has chosen to define its strategies with precision and authority. One of the winning features of this lovely GT is the fact that it was conceived to cater for every whim of competent, refined customers, who wish to state their personality by the way they configure their car, transforming a car that is already exclusive into something unique. By the same principle, the ‘Unique Alfa’ Programme, the expression of the best Italian products, now extends this opportunity to the other Alfa Romeo models. Alfa Romeo is one of the most prestigious brands in motoring history, and it indubitably conjures up the art of Italian living, expressed in a perfect synthesis of tradition and modernity, heritage and the avant-garde, beauty and culture. And it is thanks to this propensity for art and beauty that the Alfa Romeo Customisation Programme has taken shape, developing into three different areas that identify the brand’s exclusive values and make its relationship with its customers unique.


The first area, known as ‘Vintage’, reinterprets Alfa Romeo tradition with elegance and modernity: intriguing colours that conjure up the Dolce Vita or victories on the world’s most prestigious racing circuits, chromatic treatments that recall the timeless emotion of the prestigious finish, and upholstery crafted with the care and precision typical of a craftsman’s workshop.


‘Collezione’ is the second area, which invites customers to explore the world of fashion and elegance. The interiors are designed to recreate a sensation of well-being and beauty, underlined by the materials chosen to give a feeling of sensory involvement: soft, perfumed leather covers the seats, facia, and panels; the stitching reveals and underlines the sinuous, elegant shapes; the real metal inserts propose different finishes. On the exterior, multi-layer lacquered paints give an extra touch of elegance to the lines of the body, drawing attention to the ornamental elements and the alloys with their luminous sparkle finish.


The third and final area of the ‘Unique Alfa’ programme is ‘TI’ (Turismo Internazionale), which obviously harks back to Alfa Romeo tradition, where racing and competitions have always played an important part in the development of cutting-edge technologies designed to guarantee the proverbial enjoyment of driving an Alfa Romeo, and safety in all driving conditions. The heritage of technological culture and a passion for the product have laid the foundations for the development of this area, which addresses customers who are particularly demanding where performance, dynamic behaviour and sporty personality are concerned, with mechanical components such as a low stance, boosted braking system, alloy wheels and high performance tyres. And in the immediate future, this exciting catalogue will also incorporate other features to raise the performance of the powerful Alfa Romeo engines even higher.



Click Here To Read More…

eXTReMe Tracker